Hi All, I'd just like to apologize for a lack of updates and lack of responses for some comments people have been leaving here!
I've have since graduated from college and currently work full time as a software developer so I no longer have much free time. It also seems that I have lost access to the Pier78.ga domain so I'll figure something out once I have time. Overall I didn't expect to get any comments at all on this blog when I first created it so I'm glad that some of you guys appreciate the content.
Thanks, and happy new year!
So recently I posted about my H55 failing. I have since swapped out the cooler with a Phantek PH-TC14PE, and now my 2500K temperatures are back to normal. woo
Since the TC14PE comes with two of its own 140mm fans I decided that I would move the SP120's that I bought with my H55 cooler to the front since Static Pressure fans are excellent intake fans.
Overall Corsair CMYAF Memory Cooler is the most useless component I have ever purchased for a computer. The fan rattles at all RPM. As you can see in the picture I had even used a low noise adapter (it's actually just a cable with 4 pins with a resistor in between).
This was a surprising find. When I was getting ready to swap about the front intake fans, I noticed that the top fan's screw is partially covered by the front paneling. Although it is easy to pop off the front paneling (I initially thought you needed to unscrew it but you actually can just apply pressure and pull it out), its an extra step that shouldn't be necessary.
Temperatures were measured using OpenHardwareMonitor. I'll do a more in-depth test when I have time (e.g. using LINX). 100% load was achieved using Cinebench R15 so I'm quite satisfied with the temperatures. If I recall correctly, the H55 was not able to maintain temperatures below 65C while running Cinebench (even the Hyper 212+ from Coolermaster could).
![]() |
| PH-TC14PE Box |
![]() |
| The cooler was a lot larger than I had imagined. It pretty took space from the entire box. |
![]() |
| Specifications on the box. |
![]() |
| Well I'm going to open my case, might as well clean out the dust filters, #330R. |
Since the TC14PE comes with two of its own 140mm fans I decided that I would move the SP120's that I bought with my H55 cooler to the front since Static Pressure fans are excellent intake fans.
![]() |
| Rig before changing out the cooler. |
![]() |
| I have to put this away since the TC14PE doesn't have enough clearance. |
![]() |
| H55 Radiator. As you can see Corsair definitely cut corners here as the spacing between the fins are not uniform |
![]() |
| Right before removing the H55 |
![]() |
| Cleaned the 2500K |
![]() |
| Front Paneling actual blocks the screws for the 140mm Fan |
![]() |
| Popped out the front paneling, and unscrewing the fan. |
![]() |
| Cleaning the dust from fans (cringe) |
![]() |
| Comparison of the TC14PE's height to the width of the Corsair 330R case. |
![]() |
| The instructions claim you need to take out your motherboard to install the mounts, but it depends on your case. The 330R has a hole from the backside so you don't need to remove the motherboard. |
![]() |
| Ready to mount the heatsink. |
![]() |
| Managed to secure the enormous heatsinks onto the motherboard. |
I feel like instruction manuals for aftermarket coolers like these (Arctic Accelero--you too) start off very clear and concise. But then when you are about to finish, its like the that was guy hired to write the instructions and make the reference images just gets lazy and gives up . The PH-TC14PE's installation is pretty intuitive. Instructions for the cooler are straight forward, until securing the parallel mounts. As you can see below, the only image showing the orientation of the mounts is on a picture where an sketch of the heatsink is overlayed on top of it, making it hard to see the holes. The resource was pulled off a PDF from Phantek's site.
![]() |
| The image is helpful, but isn't very easy to decipher until you zoom in...a lot |
Obviously, the actual paper manual you receive has small smaller images, thought albeit is a cleaner image. The orientation for that the holes on the mounts should be pointing towards the processor on both mounts.
![]() |
| All done. Ready to go! |
![]() |
| New temperatures, I actually hit 26C this morning. Pretty good temps (I live in Hawaii--for reference) |
Temperatures were measured using OpenHardwareMonitor. I'll do a more in-depth test when I have time (e.g. using LINX). 100% load was achieved using Cinebench R15 so I'm quite satisfied with the temperatures. If I recall correctly, the H55 was not able to maintain temperatures below 65C while running Cinebench (even the Hyper 212+ from Coolermaster could).
So recently I started noticing that my Corsair H55 was occasionally making gurgling noises or I guess "water movement noises". There are no grinding noises indicating a failing pump. The fans are spinning at the proper RPM's and the pump is connected to a working power source. I have been been experiencing issues with hard lock ups (which typically indicate unstable OC's on the processor) so I ended up lowering my 2500K's OC (I actually bumped it up to 4.6 GHz a while back).
However I was curious one day and watched my processor's temperatures fluctuate quite a bit while the H55 made gurgling noises. The temperature didn't skyrocket by any means, but I was a bit intimidated by the noise. Whats the worst that could happen? ...The H55 spontaneously bursts and liquid splashes all over my components!! But seriously, I decided to leave Open Hardware Monitor running while doing basic activity (programming, web browsing--not even anything cpu intensive) and I noticed this:
However I was curious one day and watched my processor's temperatures fluctuate quite a bit while the H55 made gurgling noises. The temperature didn't skyrocket by any means, but I was a bit intimidated by the noise. Whats the worst that could happen? ...The H55 spontaneously bursts and liquid splashes all over my components!! But seriously, I decided to leave Open Hardware Monitor running while doing basic activity (programming, web browsing--not even anything cpu intensive) and I noticed this:
So I have no idea what's going on. The temperature should NOT being reaching that high. Generally the motherboard should force shutdown before reaching those kinds of temps. Maybe it was a split second burst of heat? I have no idea. I popped open the case--the H55 was not loose or anything. One of the tubes was piping hot, the other was very cool. The liquid is not moving perhaps? I have no idea, and don't really have the time to figure it out.
I have ordered a Phantek TC14PE as a cooler replacement. That's two products for me by Corsair (H55 and CX750M) that failed in less than HALF a year. Sure, you can argue that the H55 is a low end closed loop cooler. Sure, the CX750M is a low end Corsair modular power supply--but that in no way justifies cutting enough corners that the products fail within half a year.
So I've always wanted a mechanical keyboard with blank keys. Unfortunately CoolerMaster does not sell one. I have a CM Storm QuickFire Rapid that I had purchased off Amazon a while back (2 years+). It is 10-key less and has amazing durability (still up and running after two years) and feels like its indestructible.
A couple of months ago I had purchased Plastic White Blank PBT Keycaps off ebay for about $26. I also disliked the color of the QFR which is a darkish brownish grey sort of color so I initially planned to use plasti-dip but unfortunatley they do not ship canned spray anything to my area and the last time I visited Home-Depot plasti-dip was out of stock. I ended up just buying some faux carbon fiber vinyl from ebay for $6.25 for a 5' by 1' roll--pretty sweet. Though its not 3M di-noc quality by anymeans, it is cheap and worked.
I also bought some o-rings off ebay for the keycaps. It was much more worth it on ebay--I just made sure to get o-rings with the same specs as the ones you would find on Amazon. I'd avoid buying them from Amazon since they charge some pretty crazy prices ($15 minimum for a set of 125 pieces) when I found the same for a dollar or so from ebay.
Ultimately I really liked the keycaps and o-rings. PBT caps feel a lot more durable than the ABS caps that CoolerMaster uses. However I wasn't quite satisfied with the Vinyl Wrap. Unfortunately it wasn't quite effective at wrapping around corners and as a result did not meet my satisfication. I might end up attempting to find some black plasti-dip at Lowes or trying Home Depot again but for now I am really digging the new look. This definitely brought some new life back to my keyboard.
![]() |
| Final Product |
A couple of months ago I had purchased Plastic White Blank PBT Keycaps off ebay for about $26. I also disliked the color of the QFR which is a darkish brownish grey sort of color so I initially planned to use plasti-dip but unfortunatley they do not ship canned spray anything to my area and the last time I visited Home-Depot plasti-dip was out of stock. I ended up just buying some faux carbon fiber vinyl from ebay for $6.25 for a 5' by 1' roll--pretty sweet. Though its not 3M di-noc quality by anymeans, it is cheap and worked.
![]() |
| Clear o-rings + Blank White PBT Keycaps and Wrapped Plastic Cover |
![]() |
| Not sure how that black speck on the W key got there but I cleaned it off :o |
So I just recently finished Dragon Age Inquisition and I must say it has been a really mixed ride. I've been really unsatisfied with games that have been released in the past few years. Generally a rule of thumb I use to recommend games is that fact if I am actually able to FINISH the game (though this rule doesn't work all the time because I've finished Diablo 3 on Inferno 2 weeks or so after release using a monk (without cheat tactics like critical mass/low hp+high regen wizz *tbh wizz was pretty borked*) and I absolutely HATED it. Usually I am unable to finish games I find unsatisfying--that includes games well received games like Bioshock Infinite--though very refined and artistically/graphically awe-inspiring, I could not find myself to finish it. It didn't evoke the same intrigue for me that the first Bioshock had.
When Inquisition was revealed, I was really skeptical since I really liked Dragon Age: Origins, but strongly disliked Dragon Age 2. I liked that Dragon Age 2 was easier and more accessible than Origins (it played more like an mmo/rpg kind of style), but the game felt like a complete rip off. After I defeated the final boss I expected only to be half-way completed with the game. When I realized the game was over, I was in shock.
Ultimately I ended up getting Inquisition on release day.
The GOOD
TL;DR: GAME LOOKS GREAT, SOLID GAMEPLAY, ENGAGING STORY
First off the game was smooth and looks AMAZING. The game is built off DICE's Frostbite 3 engine--same one used for Battlefield 4. I was in awe with how beautiful the game was, though it was difficult to run the game at maximum settings with my rig and as a result did not play with a stable 60 FPS (was along the lines of an average 40-50 FPS with Mantle).
When Inquisition was revealed, I was really skeptical since I really liked Dragon Age: Origins, but strongly disliked Dragon Age 2. I liked that Dragon Age 2 was easier and more accessible than Origins (it played more like an mmo/rpg kind of style), but the game felt like a complete rip off. After I defeated the final boss I expected only to be half-way completed with the game. When I realized the game was over, I was in shock.
Ultimately I ended up getting Inquisition on release day.
The GOOD
TL;DR: GAME LOOKS GREAT, SOLID GAMEPLAY, ENGAGING STORY
First off the game was smooth and looks AMAZING. The game is built off DICE's Frostbite 3 engine--same one used for Battlefield 4. I was in awe with how beautiful the game was, though it was difficult to run the game at maximum settings with my rig and as a result did not play with a stable 60 FPS (was along the lines of an average 40-50 FPS with Mantle).
The Emerald Graves was by far my favorite location in the game.
In terms of game play, spells and attacks are pretty and appear very fluid. Team compositions are fun to experiment with. I started off the game in hard mode--not nightmare. I personally find Normal mode generally too easy and kick myself for not bumping up the difficulty--but I don't really have the time to dedicate myself to playing a video game so I didn't want to play nightmare. However, I found hard mode a bit too easy and regret not playing on nightmare now, though I really enjoyed the game and may do a second run on nightmare.
I originally started off as a 2 handed warrior (was going to build into Reaver) but it felt really weak (I didn't reach unlocking Reaver specialization) and progressing in the game was difficult as I often found myself running low on potions--you do not heal after fights and you have to go back to camp to heal. Mobs respawn relatively quickly so sometimes going back to camp isn't an option. However I switched over to Varric and realized how strong the bow man rogue was and ended up changing my starting class to Archer Rogue and found myself have a much easier time despite being on hard difficulty.
My party consists of a main composition of Vivienne (Knight Enchanter) as support, Blackwall (Champion) as a Tank, my main was an Rogue (Artificer) for damage. The last slot I switched around a bit. Originally it was Iron Bull who is a reaver but he kept losing health quickly and as a result I switched him out with Dorian (who is a necromancer). I ended up switching out Dorian with Cole (who is a double dagger Rogue--Assassin) however *spoiler* you cannot use Cole with the last boss fight so I brought back Dorian. For the last fight. Although you can keep playing through the game after you beat it.
Overall I had a blast with character combinations in my party but I felt the game was too easy--on hard mode. With my team composition I effectively NEVER had to use any serious strategy. I only had to control one character at most (most of the time my archer). In fact my archer was equipped with a bow that splits the attack into 3 arrows. As a result, dragons would be easy picking since each arrow would hit on average about 200-600 damage per an arrow. With the shear size of the dragon, despite the arrow split, all 3 arrows would land on the dragon and as a result would do about 600-1.8k damage per an autoattack (I sometimes found myself at times doing more damage spamming autoattacks rather than spells like long shot or full draw which have cast times). The only dragons I had trouble with were electric dragons however I found out that micromanaging Vivienne exclusively for these dragons was the key to defeating them with ease. I use her with Full spirit tree, some points in the Winter tree and almost complete Knight Enchanter tree. The electric dragons are special since they use the electricity ring debuff that draw these blue lightning circles around each character (if these large rings for each character collide, those involved in collision take severe damage). However with Vivienne, Fade Cloak removes the debuff instantly giving her the time to cast dispel on teammates. I also use Fade Step to keep her alive and be able to constantly resurrect fallen teammates to full HP.
The game also has an interesting War Room mechanic where you use "power" (which are gained by doing quests and closing rifts), to unlock new areas (the environments--although large are NOT contiguous and open world like Skyrim). You can also use your helpers to gather materials or acquire other resources like gold or influence. Your helpers, however for power based unlocks, actually require TIME to complete the tasks you give them. Some of these tasks actually take a very long time (one I had was 18 hours REAL-TIME; the game uses your system clock so it still counts down even when the game is closed however).
Another cool thing about the game is the implementation of DragonKeep. Although some people found it controversial, I thought it was an amazing implementation. It is basically a web based tool for recreating your story since Inqusition's story builds upon choices you've made in the past Dragon Age games. Unfortunately for me I do not have any of the saves from the other Dragon Ages (though I beat both of them and have them both on Origin and Steam [before the Steam/EA fallout]) so it was cool to be able to rebuild my story without having to play through the old games again. Really cool work by Bioware.
The UGLY
So overall the game is really quite fun, had some interesting new things and I enjoyed it...but what about the ugly things about the game? Personally these are the things that really make it hard to recommend such a fun game.
LONG LOADING TIMES
Nuff said.
LONG LOADING TIMES
Nuff said.
BAD AI
Horrible. Terrible. Headache Inducing. Any of these can describe the AI in the game. First off, archers are pretty broken in the game and made my game easy on hard mode. This was solely due to the fact that the MOB/MONSTER AI is horrendous. A lot of times, the mobs may get stuck or just randomly stop attacking. Bosses and regular monsters alike appear to be affected by this. Archers can also snipe monsters from far away without triggering aggression and as a result my archer was able to solo level 12 rifts despite a party of level 6 members.
Not only is the MOB AI bad, but so is the AI for your companions. It was no where near this frustrating in the past Dragon Ages. Sometimes when fighting dragons your companion AI spazzes out--running back and forth randomly eating fireballs and blasts from the dragon for dinner as if it was trying to decide what to do. At times they stop responding to the attack command and just stand there or follow you around while you curse at your companions about how you are the only one doing work. It's very frustrating how inconsistent the AI is. The behavior configurations for your companions are also very limited in comparison to the past Dragon Ages, you can no longer configure certain spells to be cast for special cases. There are now only simple "disable, enabled" or "preferred" settings for spells. If you autolevel spells for your other characters, you are going to have a bad time due to the horrendous companion AI.
In addition to this, one thing that really ruined the game for me was the fact that the FINAL BOSS of the game was way too easy to defeat in comparison to ANY of the dragons I had fought--There are 10 dragons scattered across the regions, the weakest starting at level 12--I had fought this weakest dragon with a party of level 15 characters (I was overleveled) and yet it was much tougher to take down this dragon than it was to take down the final boss (who *spoilers* also has his own dragon).
ORIGIN BUGS
ORIGIN had crashed nearly ten times total for me. When Origin crashes, the game refuses to save and forces you to restart the game with origin running. As a result I have lost progress plenty of times. This was actually how I confirmed the AI was inconsistent as I had to fight the final boss TWICE since Origin had crashed and forced me to restart to an earlier save. The first time around the Bosses AI was buggy and did not fight back much. The second time around he was a bit harder to defeat since he used a lot more movement and combinations--though still miles easier than any of the dragons. Overall I did not lose too much progress since the game autosaves quite often, however I did have to do boss fights multiple times because of this--albeit the boss fights were pretty easy even on hardmode (assuming you have a viable team composition).
STABILITY ISSUES
Although this only occurred once for me, it DID happen. I was checking some items in my inventory and the game crashed to desktop. No error pop up, game just closed itself. Luckily the game seems to auto save often enough that I didn't really care.
GAME PLAY BUGS--Skyrim had a flawless release in comparison
Dorian, the necromancer, although equipped with very cool Necromancer spells, is a HEADACHE to have on your team. First off he has a spell that "marks" enemies to be temporarily resurrected to fight on your side. HOWEVER, the developers obviously did not pay special attention to the implementation of this spell. First off you can resurrect KEY QUEST targets. For example if you have a quest to eliminate some person in the quest, Dorian may end up resurrecting him. However there is a bug where occasionally the resurrected individual does not have a time limit and as a result is permanently resurrected. This causes issues where a user can no longer complete a quest since you cannot target friendly individuals. In some crucial quests it is required to eliminate the target in order to leave an area. This made it very frustrating for me when I had spent hours trying to figure why I couldn't leave a zone when it turned out Dorian had resurrected a key quest character that should be dead.
Achievements are also occasionally broken. Although Achievements are not very important, they are pretty much the only enticement to slay all 10 dragons in the game since theoretically you can beat the game without fighting any of them.
I beat all dragons but didn't get the achievement... I'm still bitter about this ;)
RANDOM GRAPHICAL GLITCHES
You can expect anything to happen. My characters randomly locked and looked like this.
Here is a video of it in action: http://www.hitbox.tv/video/336834
*Spoilers, a small turning point the game*Excuse the poor video quality as I was running the wrong settings on OpenBroadcaster. Though the video shows the bug in action.
So today I just received my Steelseries "Skates" that I got off of ebay from a seller named ITakTech (ebay user named takasta12). They were about 3.99 and shipping was free. It took about a week (which is arguably pretty fast) to receive the item despite the seller shipping from China. This may have been due to the fact that the item was sent in an envelope (regular letter envelope) since the package containing the mouse skates is so small. Though I will say you should not expect fast shipping from these Chinese sellers as I've ordered o-rings for my Mechanical Keyboard's cherry mx switches nearly 3 weeks ago and they still have not come... Overall the skates are just good if not better than the skates the Sensei came with when I bought it off Amazon.
If you plan on opening up your mouse, these are absolutely necessary since the screws for the mouse are placed conveniently underneath the skates so the old ones will likely become ruined when you remove them.
So the issue with my mouse was described in my last post where scrolling the mouse wheel DOWNWARD will occasionally scroll the mouse UPWARD which causes a stuttering effect and will often make me lose my position when reading long blocks of text where I need to scroll.
Turns out the issue was caused by the same issue in my death adder. I don't know if I use the scroll wheel too often, too aggressively or what--but the issue is that the mechanical component the mouse wheel is inserted to for acquiring scrolling input just plain sucks. It's design is very prone to wear and tear.
So for the fix, as seen in the picture above, I have 6 red arrows. These are the points in which I used a pair of PLIERS, and squeezed the component at each pair of arrows (top & bottom, upper left & upper right, lower left & lower right). Do not apply too much force/pressure as you can break the component. As shown in the red circle, one arms of the metal bracket surrounding device appears to have bent away from the device. This happened to be the cause of the issue on my mouse. After applying pressure to force the metal bracket back towards the black plastic wheel piece, the stutter/jumping from the mouse wheel scroll stopped.
Keep in mind I left my mouse plugged in while doing this so I could test if the stuttering has stopped.
Nevertheless I felt that the metal arms should wrap all the way around the device (e.g. a complete metal ring) rather than wrapping around just the edges. The way the device is designed right now although likely cheaper and easier to manufacture is also easier to become malformed and give users headaches.
If you plan on opening up your mouse, these are absolutely necessary since the screws for the mouse are placed conveniently underneath the skates so the old ones will likely become ruined when you remove them.
So the issue with my mouse was described in my last post where scrolling the mouse wheel DOWNWARD will occasionally scroll the mouse UPWARD which causes a stuttering effect and will often make me lose my position when reading long blocks of text where I need to scroll.
Turns out the issue was caused by the same issue in my death adder. I don't know if I use the scroll wheel too often, too aggressively or what--but the issue is that the mechanical component the mouse wheel is inserted to for acquiring scrolling input just plain sucks. It's design is very prone to wear and tear.
![]() |
| Click to Enlarge |
Keep in mind I left my mouse plugged in while doing this so I could test if the stuttering has stopped.
Nevertheless I felt that the metal arms should wrap all the way around the device (e.g. a complete metal ring) rather than wrapping around just the edges. The way the device is designed right now although likely cheaper and easier to manufacture is also easier to become malformed and give users headaches.
STEELSERIES. WHAT GIVES?
FIX: Here
So I bought the Steelseries Sensei [RAW] Rubberized around the same time I ordered my CX750M and all the other components I upgrade. It is a superb mouse. I had replaced my G600 since the G600 mouse ended up being too bulky, and I disliked the logitech peripheral software. Also the G600 doesn't have the same HARD SNAP click like the Razer Deathadder that I had before the G600. As a result I would be unable to click as fast since the pop back of the mouse click was much slower. Overall I felt the Sensei Raw (which I got for about $40 off Amazon) was a much more refined product. I think rubberized peripherals should be a standard in the computer industry, rather than a perk.
Anyways I've had this mouse for what? About two months(?), and it now exhibits the same behavior that made me stop using my Deathadder (3500DPI) which I had purchased during the summer before my first year of college (3+ years ago?). When I scroll with the mouse wheel, scrolling down wards will scroll the page downwards, but will occasionally scroll upwards instead for no reason causing a stuttering like effect when reading long posts and would make me lose my position. The same issue occurs when scrolling upwards, it will occasional scroll downward instead. As someone who heavily uses the scroll wheel, this issue annoys me like no other. Even worse I read about Steelseries' RMA process. Apparently you have to ship the product ALL THE WAY TO DENMARK. Are you flipping serious? As I explained in my DEAD CX750M post, RMAing is generally out of question for me...
This issue didn't occur on my Deathadder until nearly half a decade of usage. I managed to fix the issue temporarily on the Deathadder by opening up the mouse and using a pair of pliers on the mouse wheel mechanical component (The wheel was placed between some sort of device that that squeezed the mouse wheel in place. I applied some force to squeeze it ends closer together and it fixed the issue..temporarily--it eventually came back again). Opening the mouse for both the Deathadder and Sensei require you to remove the mice feet (the bottom pads) which ultimately ruin the mouse's glide and smoothness unless you buy a new set. As a result I did not try this fix (in addition to the fact that the sensei might use a different component).
As of now I have no idea what do. Thanks a lot STEELSERIES >_>
![]() |
Not even a year of ownership and its breaking? |
FIX: Here
So I bought the Steelseries Sensei [RAW] Rubberized around the same time I ordered my CX750M and all the other components I upgrade. It is a superb mouse. I had replaced my G600 since the G600 mouse ended up being too bulky, and I disliked the logitech peripheral software. Also the G600 doesn't have the same HARD SNAP click like the Razer Deathadder that I had before the G600. As a result I would be unable to click as fast since the pop back of the mouse click was much slower. Overall I felt the Sensei Raw (which I got for about $40 off Amazon) was a much more refined product. I think rubberized peripherals should be a standard in the computer industry, rather than a perk.
Anyways I've had this mouse for what? About two months(?), and it now exhibits the same behavior that made me stop using my Deathadder (3500DPI) which I had purchased during the summer before my first year of college (3+ years ago?). When I scroll with the mouse wheel, scrolling down wards will scroll the page downwards, but will occasionally scroll upwards instead for no reason causing a stuttering like effect when reading long posts and would make me lose my position. The same issue occurs when scrolling upwards, it will occasional scroll downward instead. As someone who heavily uses the scroll wheel, this issue annoys me like no other. Even worse I read about Steelseries' RMA process. Apparently you have to ship the product ALL THE WAY TO DENMARK. Are you flipping serious? As I explained in my DEAD CX750M post, RMAing is generally out of question for me...
This issue didn't occur on my Deathadder until nearly half a decade of usage. I managed to fix the issue temporarily on the Deathadder by opening up the mouse and using a pair of pliers on the mouse wheel mechanical component (The wheel was placed between some sort of device that that squeezed the mouse wheel in place. I applied some force to squeeze it ends closer together and it fixed the issue..temporarily--it eventually came back again). Opening the mouse for both the Deathadder and Sensei require you to remove the mice feet (the bottom pads) which ultimately ruin the mouse's glide and smoothness unless you buy a new set. As a result I did not try this fix (in addition to the fact that the sensei might use a different component).
As of now I have no idea what do. Thanks a lot STEELSERIES >_>
GOOGLE..What just happened?
So recently one of my favorite Korean Hiphop groups EPIK HIGH, just released their latest album Shoebox.
So recently one of my favorite Korean Hiphop groups EPIK HIGH, just released their latest album Shoebox.
Official Album Sampler:
Anyway, after hearing the sampler I immediately wanted the album.
Unfortunately both iTunes and Amazon Music only provide music files in 256Kbps. While AAC (iTunes file format) is arguably superior to MP3's, I couldn't find any hard evidence one is superior to another. So I'd prefer the 320Kbps MP3's from Google's Play Store, since in theory--higher bit rates means more samples thus theoretically higher quality.
The point though is that I bought the album on GOOGLE PLAY MUSIC STORE.
The issue was that their song #9 Lesson 5 (Timeline) was only 47 seconds instead of the actual 3:21 duration of the song. I reported the issue to Google.
This actually took me a while to figure so I'll post a Guide here on how to report issues with songs such as this.
1.) Go to Google Play Store e.g (https://play.google.com/store?hl=en)
2.) Click the GEAR Symbol on the top right
3.) Click My Orders
4.) The page should now list all your purchased things including Albums.
5.) Mouse over an album, you should see three vertical dots and be able to click on it.
6.) You will get a pop up allowing you to choose what kind of issue you are having with the song/album.
7.) After choosing an issue type, enter in the text box of what the issue is and submit.
HOWEVER after I did this, I received an email from GOOGLE who canceled my order and refunded me my money. I no longer have Shoebox in my Google Library.
I never asked for a refund. I bought the album to SUPPORT Epik High. I felt they produced a truly amazing album. In addition to this, since they are not really mainstream and also non-english, they don't make bank compared to American music artists.
And people wonder why people like this guy below exist...
CORSAIR PLEASE
So the other day I was tweaking my computer a bit. I was having issues with my H55 Corsair AIO Closed Loop Processor Cooler since the temperatures were quite a bit higher than I had anticipated.
Temperatures for the H55 setup were 40 IDLE - HIGH 60's/LOW 70's LOAD (Cinebench R15) and cracking 85C when really stressed (Prime 95 or LinX). Quick to jump to conclusions I simply attributed it to the fact that AIO coolers simply just suck--However this now seems more like a concept propagated by the elitist on Overclock.net who sport Custom Loops.
What had happened was that I had 'upgraded' really more like a side-grade from an Hyper 212+ from CoolerMaster that was equipped with two CoolerMaster Blade Master 120 PWM fans ($20 for 212+, one addition Blade Master $13 for a total of $33) to the H55 equipped with two Corsair SP120 Silent Fans (~$40 for the H55, $20 for a twin pack of SP120's on sale for a total of $60).
The Hyper 212+ originally had about 35C IDLE, HIGH 50's/LOW 60's LOAD (Cinebench R15) and about 65 to 68C when really stressed (Prime 95 or LinX). Perhaps the it was due to the fact that the SP120's aren't moving enough air (sacking CFM for lower db)--it was the first time I purchased fans marketed as "quiet" or "silent".
Anyway--back on to the story, I originally had the H55's pump power input (3 pin) going directly to the Power Supply since I read that the pump should be on full throttle at all times. I read a couple of forum posts stating that it should be connected to the CPU Fan 4 pin headers on the forums (I did this but had to change my fan configuration around). Long story short, this worsened my temperatures so I decided to change back to the original configuration I had.
I then thought to myself, "Well, I guess I'm basically sacking performance for aesthetics." I like how much cleaner my rig appears without the over sized 212+ Heatsink covering the top half of my motherboard, but ultimately I really appreciated the price to performance ratio that CoolerMaster products provide.
After I switched back to my old configuration for the fans and pump, I tried to turn on my rig but was faced with an issue I've never had before. When I pressed the power button other status LED's and the power LED on my Corsair Carbide 330R lit up for a SPLIT second and just turned off. What gives? I started freaking out because it appeared that the motherboard was being shorted somewhere. On the other hand I was super meticulous and made sure nothing had dropped on the motherboard (like a screw or something conductive). I couldn't tell what was the source of the issue. Did the motherboard die? Did the processor die? The ram die? No clue where to start, I had to spend my entire day debugging the issue. I took everything out and popped them back in one at time only to still have the issue. Holy crap.
I was about to give up, but I knew in the back of my head there was ONE COMPONENT that I did not isolate. The Power Supply--Corsair CX750M. I had an old 460 Watt CoolerMaster power supply laying around so I popped it in for kicks. I kept thinking to myself, its probably not the power supply--but lo and behold, my computer booted with the 460 watt power supply (I had to pull out my 290 of course). I thought to myself, WOW. This is awful. My second Corsair power supply was faulty...(I had previously rocked a CX500 when using a GTX 670--NVIDIA so power efficient (^: )
So I went over to the Corsair Support Site and they suggested to do a Paper Clip test before trying to RMA the power supply so I tried it out and WOW! The CX750M was working! I then hooked it back up and my computer booted with the CX750M and 290 installed again. What the hell just happened? I told my friends on Skype what just happened and they made jokes about Ghosts :^)
Anyway the next day, I couldn't boot my computer again with the same issue as before. It still passed the paper clip test but it couldn't power my rig. I switched back to the CoolerMaster and it booted again without a hitch.
I was then put into a dilemma. Do I RMA or just buy another Power Supply? I was hoping that with Corsair being the Top Dog when it comes to computer components (Case, PSUs, Fans) they would have a different RMA process, however their process matches every other company where I need to send in my power supply out of my own pocket and wait until they send me another one back.
Normally this may not be too bad but I live in Hawaii. Not only are shipping costs to and from here are atrocious, the time it takes to receive and send packages are atrocious as well. Basically I only shop on Amazon or sites that have Free Shipping promotions that apply to Hawaii now. Newegg and TigerDirect are basically off limits here due to shipping costs ($10 heatsinks from newegg? Sure! To Hawaii? Sure, shipping is $30, that will be $40 SIR).
Before I switched to my new LG G3 phone, my Samsung S3 died. I simply called T-Mobile up, they sent me a box with a new S3 very quickly (free of charge). I was instructed to put my dead S3 in the box the new S3 was shipped in and was able to send the dead S3 box back--also free of charge. This all happened within the course of 3 days. I think this should be a standard in the RMA process, but of course crappy people could always take advantage of this system.
In the end I opted to buy a new power supply. There was a GOLD 80 PLUS rated Rosewill 750 Watt Capstone power supply that retails at ~$90 but was at $60 on Amazon. I chose the Rosewill since it was on sale, and I was very happy with the Rosewill 630 Watt Green Series my little brother now has in his rig powering the GTX 670 I used to use. Although the Rosewill Capstone is not modular like the CX750M, the modularity of the CX750 did not help with cable management in my case. There simply was not enough space in the back side of the 330R.
In Hindsight
I know I didn't dump $100-200 on a "High End" Corsair Power Supply and opted for their CX (entry level) Power Supplies, it still sucks to be out $70 (Price I paid for CX750M on Amazon) + $60 on the new power supply. Sure I could've just paid $150 on a "High End" power supply, but if that were to be faulty to, I'd be simply gouging myself.
But I felt I should've saw it coming.
In hindsight, now that I think about it, there were some things about my computer that made it appear to the power supply was not stable. Keep in mind I only had the CX750M for two months. I got it right before I returned from Atlanta (internship with a great company!) so I could use my 290 (which is rated 300W TDP and on AMD's page, requires 750 Watt Power Supply!).
I also realized how difficult it was to diagnose a bad power supply without proper tools like a multimeter and/or oscilloscope. Though I probably could have brought it to the EE labs as a computer engineering student :^)
First thing I noticed with the new hardware installed was that my original i5-2500K OC @ 4.5GHz at 1.35volts was no longer stable. I had to bump core voltage up to 1.37-1.38. Even then, the voltages never seemed to even remain at 1.37/1.38 on load, it would simple fluctuate to 1.344 to 1.35 (the original stable V-core). I kept expericing BSOD's and lock ups until I tweaked numerous voltages on my motherboard in order to achieve stability.
I had a feeling I had a bad power supply from the start, but I fooled myself into thinking it was good since forum posts all over Overclock.net and other forums judge the power supply by 12v, 3.3v, etc. readings on their motherboard sensors. All of my voltage readings were well within expected parameters so I assumed there was nothing wrong with my power supply.
With the CoolerMaster 460W power supply, my IDLE are now 31-32C and load temps HIGH 50's/LOW 60's CINEBENCH R15 (similar load temps to 212+, cooler in idle). Much closer to what I expected. Not sure why the processor runs much cooler with this power supply considering the voltages in the bio settings were not changed.
On the other hand
Now all I'm hoping is that the power supply was a piece of crap from the get-go and hopefully the bad PSU was the cause of my R9 290 blackscreens.I will make another post as an update.
Update:
I have installed the new capstone power supply from Rosewill and my rig is up and running again. However, unfortunately the power supply was not cause of the black screens. I am now 100% sure the black screens are caused by a hardware issue on the R9 290.
So the other day I was tweaking my computer a bit. I was having issues with my H55 Corsair AIO Closed Loop Processor Cooler since the temperatures were quite a bit higher than I had anticipated.
Temperatures for the H55 setup were 40 IDLE - HIGH 60's/LOW 70's LOAD (Cinebench R15) and cracking 85C when really stressed (Prime 95 or LinX). Quick to jump to conclusions I simply attributed it to the fact that AIO coolers simply just suck--However this now seems more like a concept propagated by the elitist on Overclock.net who sport Custom Loops.
What had happened was that I had 'upgraded' really more like a side-grade from an Hyper 212+ from CoolerMaster that was equipped with two CoolerMaster Blade Master 120 PWM fans ($20 for 212+, one addition Blade Master $13 for a total of $33) to the H55 equipped with two Corsair SP120 Silent Fans (~$40 for the H55, $20 for a twin pack of SP120's on sale for a total of $60).
The Hyper 212+ originally had about 35C IDLE, HIGH 50's/LOW 60's LOAD (Cinebench R15) and about 65 to 68C when really stressed (Prime 95 or LinX). Perhaps the it was due to the fact that the SP120's aren't moving enough air (sacking CFM for lower db)--it was the first time I purchased fans marketed as "quiet" or "silent".
Anyway--back on to the story, I originally had the H55's pump power input (3 pin) going directly to the Power Supply since I read that the pump should be on full throttle at all times. I read a couple of forum posts stating that it should be connected to the CPU Fan 4 pin headers on the forums (I did this but had to change my fan configuration around). Long story short, this worsened my temperatures so I decided to change back to the original configuration I had.
I then thought to myself, "Well, I guess I'm basically sacking performance for aesthetics." I like how much cleaner my rig appears without the over sized 212+ Heatsink covering the top half of my motherboard, but ultimately I really appreciated the price to performance ratio that CoolerMaster products provide.
After I switched back to my old configuration for the fans and pump, I tried to turn on my rig but was faced with an issue I've never had before. When I pressed the power button other status LED's and the power LED on my Corsair Carbide 330R lit up for a SPLIT second and just turned off. What gives? I started freaking out because it appeared that the motherboard was being shorted somewhere. On the other hand I was super meticulous and made sure nothing had dropped on the motherboard (like a screw or something conductive). I couldn't tell what was the source of the issue. Did the motherboard die? Did the processor die? The ram die? No clue where to start, I had to spend my entire day debugging the issue. I took everything out and popped them back in one at time only to still have the issue. Holy crap.
I was about to give up, but I knew in the back of my head there was ONE COMPONENT that I did not isolate. The Power Supply--Corsair CX750M. I had an old 460 Watt CoolerMaster power supply laying around so I popped it in for kicks. I kept thinking to myself, its probably not the power supply--but lo and behold, my computer booted with the 460 watt power supply (I had to pull out my 290 of course). I thought to myself, WOW. This is awful. My second Corsair power supply was faulty...(I had previously rocked a CX500 when using a GTX 670--NVIDIA so power efficient (^: )
So I went over to the Corsair Support Site and they suggested to do a Paper Clip test before trying to RMA the power supply so I tried it out and WOW! The CX750M was working! I then hooked it back up and my computer booted with the CX750M and 290 installed again. What the hell just happened? I told my friends on Skype what just happened and they made jokes about Ghosts :^)
Anyway the next day, I couldn't boot my computer again with the same issue as before. It still passed the paper clip test but it couldn't power my rig. I switched back to the CoolerMaster and it booted again without a hitch.
I was then put into a dilemma. Do I RMA or just buy another Power Supply? I was hoping that with Corsair being the Top Dog when it comes to computer components (Case, PSUs, Fans) they would have a different RMA process, however their process matches every other company where I need to send in my power supply out of my own pocket and wait until they send me another one back.
![]() |
| Here lies CX750M. Maybe low end Corsair products cut too many corners? |
Normally this may not be too bad but I live in Hawaii. Not only are shipping costs to and from here are atrocious, the time it takes to receive and send packages are atrocious as well. Basically I only shop on Amazon or sites that have Free Shipping promotions that apply to Hawaii now. Newegg and TigerDirect are basically off limits here due to shipping costs ($10 heatsinks from newegg? Sure! To Hawaii? Sure, shipping is $30, that will be $40 SIR).
Before I switched to my new LG G3 phone, my Samsung S3 died. I simply called T-Mobile up, they sent me a box with a new S3 very quickly (free of charge). I was instructed to put my dead S3 in the box the new S3 was shipped in and was able to send the dead S3 box back--also free of charge. This all happened within the course of 3 days. I think this should be a standard in the RMA process, but of course crappy people could always take advantage of this system.
In the end I opted to buy a new power supply. There was a GOLD 80 PLUS rated Rosewill 750 Watt Capstone power supply that retails at ~$90 but was at $60 on Amazon. I chose the Rosewill since it was on sale, and I was very happy with the Rosewill 630 Watt Green Series my little brother now has in his rig powering the GTX 670 I used to use. Although the Rosewill Capstone is not modular like the CX750M, the modularity of the CX750 did not help with cable management in my case. There simply was not enough space in the back side of the 330R.
In Hindsight
I know I didn't dump $100-200 on a "High End" Corsair Power Supply and opted for their CX (entry level) Power Supplies, it still sucks to be out $70 (Price I paid for CX750M on Amazon) + $60 on the new power supply. Sure I could've just paid $150 on a "High End" power supply, but if that were to be faulty to, I'd be simply gouging myself.
But I felt I should've saw it coming.
In hindsight, now that I think about it, there were some things about my computer that made it appear to the power supply was not stable. Keep in mind I only had the CX750M for two months. I got it right before I returned from Atlanta (internship with a great company!) so I could use my 290 (which is rated 300W TDP and on AMD's page, requires 750 Watt Power Supply!).
I also realized how difficult it was to diagnose a bad power supply without proper tools like a multimeter and/or oscilloscope. Though I probably could have brought it to the EE labs as a computer engineering student :^)
First thing I noticed with the new hardware installed was that my original i5-2500K OC @ 4.5GHz at 1.35volts was no longer stable. I had to bump core voltage up to 1.37-1.38. Even then, the voltages never seemed to even remain at 1.37/1.38 on load, it would simple fluctuate to 1.344 to 1.35 (the original stable V-core). I kept expericing BSOD's and lock ups until I tweaked numerous voltages on my motherboard in order to achieve stability.
I had a feeling I had a bad power supply from the start, but I fooled myself into thinking it was good since forum posts all over Overclock.net and other forums judge the power supply by 12v, 3.3v, etc. readings on their motherboard sensors. All of my voltage readings were well within expected parameters so I assumed there was nothing wrong with my power supply.
With the CoolerMaster 460W power supply, my IDLE are now 31-32C and load temps HIGH 50's/LOW 60's CINEBENCH R15 (similar load temps to 212+, cooler in idle). Much closer to what I expected. Not sure why the processor runs much cooler with this power supply considering the voltages in the bio settings were not changed.
On the other hand
Now all I'm hoping is that the power supply was a piece of crap from the get-go and hopefully the bad PSU was the cause of my R9 290 blackscreens.
Update:
I have installed the new capstone power supply from Rosewill and my rig is up and running again. However, unfortunately the power supply was not cause of the black screens. I am now 100% sure the black screens are caused by a hardware issue on the R9 290.
So this happened a couple of times already, but it occurred in instances where I felt it could have been caused on accident by my own actions so I ignored it. However today when I was brushing my teeth, I heard two long beeps, the same beeps that my Chromebook makes when I start it and don't press CTRL+D (using 'unverified' OS). I walked back to my room...lo and behold, the Chromebook freaking turned itself on! The Chromebook was not plugged in, does not have any USB devices plugged in, and the lid was closed. It was sitting on a table near my bed... This event had occurred before several times, but I brushed it off. Now I know for sure--it really did turn itself on.
However, there is a 'feature' on the Chromebook where opening the lid on the Acer C7 turns on the Chromebook without pressing a button. I'm not sure how they implemented the feature, perhaps there's some sort of mechanical device in the hinges of the Chromebook and is probably faulty.. Or I could say that my Chromebook is being spied on by the NSA or even that a ghost is possessing my Chromebook.
However, there is a 'feature' on the Chromebook where opening the lid on the Acer C7 turns on the Chromebook without pressing a button. I'm not sure how they implemented the feature, perhaps there's some sort of mechanical device in the hinges of the Chromebook and is probably faulty.. Or I could say that my Chromebook is being spied on by the NSA or even that a ghost is possessing my Chromebook.
| Not really related to the Chromebook but I thought this was funny. |
So currently I am in talks with Sapphire (opened up a Support Ticket) since I am unable to change the VDDC (core voltage) offset with any software whatsoever. I have tried MSI Afterburner (and ticked off voltage unlock settings, turning off ULPS, enabling unofficial overclocking, etc), Sapphire TriXX, Gigabyte's OC Guru and Asus GPU Tweak. None of these tools gave me the option to adjust VDDC offset.
The reason I am currently interested in adjusting voltages is due to the fact that my 290's instability is caused by core clock frequency so I suspect If I were able to adjust VDDC offsets I might be able to obtain stability without sacking core clock frequency.
So far my ticket without Sapphire did not obtain much progress however, the CSR I am talking to claims that TriXX won't support VDDC offset since my card has an SKU of 21227-00 which meant my card has an AMD PCB and not a Sapphire Reference PCB (though I didn't really see why this meant I couldn't use Trixx unless Sapphire made some big changes on their own 290 PCBs). However he insisted that I should still be able to adjust VDDC offset which throws out my assumption that my 290 was Voltage Locked. I was then instructed to contact their Tech email and request for them to see if there is a BIOS that could correct my issue. Currently I have not received a response, but when I do I will update this post.
I also made another post regarding the lack of sensors on my 290(x) on GPU-Z at TechPowerUp's forum. Unfortunately no one has responded yet, I will update this post once I get a response/more information.
Update 10/7/2014
So I made posts on TPU, Overclock.net, and Guru3d forums (No Response). Sapphire Tech still hasn't responded, at this point I have given up. I think there is an issue with the IR 3567B on my card as I2C dumps do not seem to reveal any devices. I ran/tested a version of The Stilt's BIOS which have increased voltages and my card was able run at stock 290x speeds at 1000Mhz for the first time, however ended up black screening. I'm not quite sure what he did with the BIOS it could either be that the voltages for my cards are wonky and as a result his voltage settings helped my card achieve greater stability (though still not fully stable) at 1GHZ core clock, or that his modifications to the bios ultimately causes the core not to stress out as much and as a result didn't result in instant black screens. Either way, I have given up on the 290(x) for now, I am satisfied with its performance and may jump back into it when I have more time (but I will likely jump ship back to NVIDIA by then).
The reason I am currently interested in adjusting voltages is due to the fact that my 290's instability is caused by core clock frequency so I suspect If I were able to adjust VDDC offsets I might be able to obtain stability without sacking core clock frequency.
So far my ticket without Sapphire did not obtain much progress however, the CSR I am talking to claims that TriXX won't support VDDC offset since my card has an SKU of 21227-00 which meant my card has an AMD PCB and not a Sapphire Reference PCB (though I didn't really see why this meant I couldn't use Trixx unless Sapphire made some big changes on their own 290 PCBs). However he insisted that I should still be able to adjust VDDC offset which throws out my assumption that my 290 was Voltage Locked. I was then instructed to contact their Tech email and request for them to see if there is a BIOS that could correct my issue. Currently I have not received a response, but when I do I will update this post.
I also made another post regarding the lack of sensors on my 290(x) on GPU-Z at TechPowerUp's forum. Unfortunately no one has responded yet, I will update this post once I get a response/more information.
Update 10/7/2014
So I made posts on TPU, Overclock.net, and Guru3d forums (No Response). Sapphire Tech still hasn't responded, at this point I have given up. I think there is an issue with the IR 3567B on my card as I2C dumps do not seem to reveal any devices. I ran/tested a version of The Stilt's BIOS which have increased voltages and my card was able run at stock 290x speeds at 1000Mhz for the first time, however ended up black screening. I'm not quite sure what he did with the BIOS it could either be that the voltages for my cards are wonky and as a result his voltage settings helped my card achieve greater stability (though still not fully stable) at 1GHZ core clock, or that his modifications to the bios ultimately causes the core not to stress out as much and as a result didn't result in instant black screens. Either way, I have given up on the 290(x) for now, I am satisfied with its performance and may jump back into it when I have more time (but I will likely jump ship back to NVIDIA by then).
So recently the new GTX 970/980s were revealed and to my surprise--NO NVIDIA DOMINANCE PRICING. Did not expect that at all. The GTX 970&980's perform phenomenally at their price points. The 980 superior in both performance and technological aspects to the 780TI, and at a lower cost (release pricing 500 vs 700). The 970 being ridiculously cost effective in comparison to even AMD solutions at ~$320-350 ($330 for an ACX cooled EVGA 970!). At this point I wanted to chuck my R9 290 out the window and prepare my wallet...
Ultimately, I chose not to do it. I seriously want to as it would erase the headaches that the 290 has given me, but I plan to do a platform change (Sandy Bridge -> Intel's Skylake) in 2015/2016 and by then NVIDIA will have something even better than what they've delivered with the GTX 9XX series.
Nevertheless, I suppose the R9 290 I picked up wasn't too bad of a purchase as I was able to get it for about 200, the Arctic Accelero IV for about 80, VRAM&VRM heatsinks about 40 totaling roughly 320--the cost of a 970 roughly. Performance wise they would be the same give or take at stock, however as described by my Black screen FIX/WORKAROUND post, I virtually have no overclocking ability that the GTX 970 obviously has since to maintain my 290's stability, I have to limit core clock to 845Mhz. Overclocking the memory frequency does not provide performance gains as the core clock at 845 mega hertz IS indeed a bottleneck--as proven by overclocking my memory frequency from 1250 to 1450 Mhz gives the same FPS in Unigine Valley benchmark, but pushing the core clock up past 845 (sometimes stable enough to benchmark but not enough for actual everyday usage) would result in performance gains of nearly 10 fps. As a result the GTX 970 could easily pull away in terms of performance--let alone the fact that it is incredibly power efficient at a rated 165W TDP (especially when compared to the 290's 275W TDP) and runs a lot cooler, has full DX12 hardware support, and optimizations for Oculus Rift which I definitely plan on picking up once the consumer version comes out.
However, If I grab the 970 now, I'm only going to regret not waiting out for NVIDIA's next line GPU architecture Pascal with new potential technologies NVLINK? Stacked VRAM? Perhaps maybe even AMD will have new enticing graphics cards. Until recently (after getting the 290) I've never had an issue with NVIDIA or AMD, but as of now I would probably always recommend and/or choose NVIDIA over AMD's solutions. I'll post my NVIDIA vs AMD post soon when I have time to finish it. I had written it a long time ago but since technologies from the two companies keep changing, the post has gone out of date very quickly. Initially it was objective, favoring neither NVIDIA or AMD but since the products they dish up keep pulling an edge over each other, it would result in my opinion of who is a better choice would flip within months of writing it -- however after my headaches with the 290, I will likely strongly favor NVIDIA with a PRO NVIDIA post.
Some other updates with my R9 290
I have since removed the back plate from my R9 290 that came with the Arctic Accelero. In order to remove it I had to reapply the thermal paste on the GPU. I had done three things, removed back plate + thermal pads, readjusted the VRM heatsinks and reapply GPU paste then secured the cooler back on.
This has solved a minor issue with my GPU where moving the mouse during no load while cause a audible high pitch whining (though I have a Corsair 330R so it was bearable). After removing the back plate with the thermal pads I put it in a ziploc bag should I decide to reinstall it. I also added plastic washers when securing on the screws for the VRM heatsinks. In addition to this when cleaning the GPU die I realized I had initially put way too much and there was Arctic Silver 5 all over the resistors/IC on the GPU. Normally this is not an issue BUT Arctic Silver 5 is actually a little electrically conductive! I had no idea about this, and many posts claim that AS actually understate how conductive the compound really is. I cleaned up the gpu as much as I could but it obviously could use some more. One of these three things fixed my GPU whine (awesome) but the black screen issue still exists.
As a result I have a theory that my black screens maybe potentially related to the electrically conductive Arctic Silver splattered all over the resistors and IC's on the GPU chip since I couldn't clean it enough and the fact that I am black screening from variances in CORE CLOCK only. I will clean it as much I can again when I have time with a tooth brush + alcohol and see if it fixes my black screens.
Changes:
Motherboard: ASRock Z77 Pro3 -> Intel DZ68BC
GPU: Took off Arctic Accelero Heatsink Backplate
HDD: Broke Raid 0 Array, Added 1TB Western Digital Blue Caviar
Cooling: Changed CMYAF fan color to Blue from Silver, Changed SP120's fan colors to blue.
I changed the motherboard since on the Pro3, the SATA 6 ports were blocked by the GPU since the geniuses as ASRock decided that people who get the Pro3 wouldn't have large GPUs thus equipped the board with SATA 6 ports that point vertically up in the area where the GPU usually goes over (across from the end of the PCI-E x16 bus). Overall I got the DZ68BC cheap ($50 new) since it is outdated hardware, though it does have BIOS issues (I may write up a post about it)
Update #1: Cleaned my 290 as clean as I possibly could with a tooth brush + 91% Isopropyl (Alcohol), still black screens at stock settings.
Nevertheless what I did gain from cleaning it was seeing a label number which confirms some claims users on Overclock.net had made about unlocking 290s to 290x's. There was a claim that "290x chips were labeled (xxxx2000)" and along the lines that they were binned as 290x but were sold as 290s (with 290 BIOS) to either 1.) increase supply of 290s or 2.) 3rd party (e.g. Sapphire, XFX, Asus) decided the particular GPU did not meet their OCing standards and dropped it down to a 290. In my case, I am able to unlock my 290 to a 290x as well as have a label containing 2000 for the last 4 digits.
Ultimately, I chose not to do it. I seriously want to as it would erase the headaches that the 290 has given me, but I plan to do a platform change (Sandy Bridge -> Intel's Skylake) in 2015/2016 and by then NVIDIA will have something even better than what they've delivered with the GTX 9XX series.
Nevertheless, I suppose the R9 290 I picked up wasn't too bad of a purchase as I was able to get it for about 200, the Arctic Accelero IV for about 80, VRAM&VRM heatsinks about 40 totaling roughly 320--the cost of a 970 roughly. Performance wise they would be the same give or take at stock, however as described by my Black screen FIX/WORKAROUND post, I virtually have no overclocking ability that the GTX 970 obviously has since to maintain my 290's stability, I have to limit core clock to 845Mhz. Overclocking the memory frequency does not provide performance gains as the core clock at 845 mega hertz IS indeed a bottleneck--as proven by overclocking my memory frequency from 1250 to 1450 Mhz gives the same FPS in Unigine Valley benchmark, but pushing the core clock up past 845 (sometimes stable enough to benchmark but not enough for actual everyday usage) would result in performance gains of nearly 10 fps. As a result the GTX 970 could easily pull away in terms of performance--let alone the fact that it is incredibly power efficient at a rated 165W TDP (especially when compared to the 290's 275W TDP) and runs a lot cooler, has full DX12 hardware support, and optimizations for Oculus Rift which I definitely plan on picking up once the consumer version comes out.
However, If I grab the 970 now, I'm only going to regret not waiting out for NVIDIA's next line GPU architecture Pascal with new potential technologies NVLINK? Stacked VRAM? Perhaps maybe even AMD will have new enticing graphics cards. Until recently (after getting the 290) I've never had an issue with NVIDIA or AMD, but as of now I would probably always recommend and/or choose NVIDIA over AMD's solutions. I'll post my NVIDIA vs AMD post soon when I have time to finish it. I had written it a long time ago but since technologies from the two companies keep changing, the post has gone out of date very quickly. Initially it was objective, favoring neither NVIDIA or AMD but since the products they dish up keep pulling an edge over each other, it would result in my opinion of who is a better choice would flip within months of writing it -- however after my headaches with the 290, I will likely strongly favor NVIDIA with a PRO NVIDIA post.
Some other updates with my R9 290
I have since removed the back plate from my R9 290 that came with the Arctic Accelero. In order to remove it I had to reapply the thermal paste on the GPU. I had done three things, removed back plate + thermal pads, readjusted the VRM heatsinks and reapply GPU paste then secured the cooler back on.
This has solved a minor issue with my GPU where moving the mouse during no load while cause a audible high pitch whining (though I have a Corsair 330R so it was bearable). After removing the back plate with the thermal pads I put it in a ziploc bag should I decide to reinstall it. I also added plastic washers when securing on the screws for the VRM heatsinks. In addition to this when cleaning the GPU die I realized I had initially put way too much and there was Arctic Silver 5 all over the resistors/IC on the GPU. Normally this is not an issue BUT Arctic Silver 5 is actually a little electrically conductive! I had no idea about this, and many posts claim that AS actually understate how conductive the compound really is. I cleaned up the gpu as much as I could but it obviously could use some more. One of these three things fixed my GPU whine (awesome) but the black screen issue still exists.
As a result I have a theory that my black screens maybe potentially related to the electrically conductive Arctic Silver splattered all over the resistors and IC's on the GPU chip since I couldn't clean it enough and the fact that I am black screening from variances in CORE CLOCK only. I will clean it as much I can again when I have time with a tooth brush + alcohol and see if it fixes my black screens.
Motherboard: ASRock Z77 Pro3 -> Intel DZ68BC
GPU: Took off Arctic Accelero Heatsink Backplate
HDD: Broke Raid 0 Array, Added 1TB Western Digital Blue Caviar
Cooling: Changed CMYAF fan color to Blue from Silver, Changed SP120's fan colors to blue.
I changed the motherboard since on the Pro3, the SATA 6 ports were blocked by the GPU since the geniuses as ASRock decided that people who get the Pro3 wouldn't have large GPUs thus equipped the board with SATA 6 ports that point vertically up in the area where the GPU usually goes over (across from the end of the PCI-E x16 bus). Overall I got the DZ68BC cheap ($50 new) since it is outdated hardware, though it does have BIOS issues (I may write up a post about it)
Update #1: Cleaned my 290 as clean as I possibly could with a tooth brush + 91% Isopropyl (Alcohol), still black screens at stock settings.
Ignore the smudge (I cleaned it off after taking the picture).
Nevertheless what I did gain from cleaning it was seeing a label number which confirms some claims users on Overclock.net had made about unlocking 290s to 290x's. There was a claim that "290x chips were labeled (xxxx2000)" and along the lines that they were binned as 290x but were sold as 290s (with 290 BIOS) to either 1.) increase supply of 290s or 2.) 3rd party (e.g. Sapphire, XFX, Asus) decided the particular GPU did not meet their OCing standards and dropped it down to a 290. In my case, I am able to unlock my 290 to a 290x as well as have a label containing 2000 for the last 4 digits.
This was both good and bad news in my case. The good news is that my card is actually able to unlock to a 290x and that its not a fluke, the bad news is that I suspected Arctic Silver on the components of the die as being a potential cause for the black screens (and its not). The only thing I can think of now is that I need to bump up core voltage but the Hawaii line uses voltage offsets. I am currently unable to find a way to change the clock voltage (vddc) offset through Afterburner or Trixx. The slider doesn't show up in Trixx or GPUTweak, and is blank for Afterburner. Hopefully I'll figure it out.







































